RaynGuard +PLUS

Want a step up in performance? RaynGuard +PLUS is a selectively blended co-polymer emulsion designed to modify SteelGuard or OverKote to achieve improved toughness and tenacity, color enhancement and greater flexibility. RaynGuard +PLUS is recommended for badly eroded pavements, severe and demanding traffic loads or, when combined with larger particle angular aggregates, for more improved skid resistance.

Available by special order in bulk, IBC tote, or 5 gallon pail.


Mix well before using. Add RaynGuard +PLUS at a rate of 2 to 4 gallons to modify 100 gallons of SteelGuard or OverKote. The amount will vary according to pavement surface and condition demands, any applicable specifications and amount of additional aggregate desired to be added.
Place unmodified RaynGuard +PLUS into an appropriate spray or squeegee machine equipped with a mechanical mixer. If necessary or required, add the appropriate amount of water. Pour RaynGuard +PLUS slowly into the mix while agitating and mix to uniform consistency. Add proper amount of aggregates and mix thoroughly before application.


Smooth Pavements with High Traffic Stresses: Adding RaynGuard +PLUS at 2% (2 gallons per 100 gallons of SteelGuard or OverKote) will improve resistance to flushing, tearing and rapid traffic wear.

Smooth Pavements with the need to higher traction: Adding RaynGuard +PLUS at 3% to 4% (3 to 4 gallons per 100 gallons of SteelGuard or OverKote) along with the addition of finely crushed aggregate (not rounded sand particles) in the 20 to 30 mesh size at the rate of 3 to 4 pounds per gallon of total mix will provide an improved friction surface.

Heavily eroded pavements: Adding RaynGuard +PLUS at 2 to 3% (2 to 3 gallons per 100 gallons of SteelGuard or OverKote) will allow the addition of clean sand or finely crushed aggregates to help provide more body and filler for excessive asphalt voids found in highly eroded pavements.